Prama PT‑SW1U10P‑E is a compact 10‑port 10/100 Mbps unmanaged PoE switch with 8× PoE ports and 2× 10/100 Mbps uplink RJ45 ports. It supports IEEE 802.3af / 802.3at PoE standards, provides VLAN, Default, and Extend modes (with up to 250 m link extension), and includes store‑and‑forward switching with line‑speed performance on all ports. It is ideal for medium‑size IP camera systems, small offices, and home networking where you need to power and connect multiple PoE devices over a single Ethernet cable without manual configuration.

Port configuration

• PoE ports: 8 × 10/100 Mbps RJ45 PoE ports (ports 1–8, data + power).

• Uplink ports: 2 × 10/100 Mbps RJ45 uplink ports (ports 9–10, data only).

• Total ports: 10 RJ45 ports (8 PoE + 2 uplink).

Standards and PoE support

• Complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3x Ethernet standards.

• PoE standard support: IEEE 802.3af / 802.3at.

• RJ45 ports support 10/100 Mbps auto‑sensing, full/half duplex, and Auto MDI/MDIX (automatic port flipping).

Operating modes and extend capability

• Default mode:

  • All ports (1–10): 10/100 Mbps up to 100 m, PoE watchdog mode is off.

• VLAN mode:

  • PoE ports (1–8): isolated from each other but can communicate with uplink ports.

  • PoE ports auto‑enable watchdog mode for fault recovery.

• Extend mode:

  • PoE ports (1–8): 10 Mbps up to 250 m.

  • Uplink ports (9–10): 100 Mbps up to 100 m.

  • PoE ports auto‑enable watchdog mode for stable long‑distance operation.

Extend mode allows long‑distance cable runs for IP cameras in parking lots, perimeters, and large facilities.

Power and protection

• PoE power budget: typically 120 W total capacity (max 30 W per port).

• Surge/lightning protection: typically 4 kV 8/20 µs per PoE port.

• Protection level: IP30 (indoor use).

Switching performance

• Switching technology: Store‑and‑forward; all ports support line‑speed switching.

• Backplane bandwidth: ultra‑high design for smooth data transmission.

• Flow control: IEEE 802.3x (full duplex) and backpressure (half duplex).

• MAC address table: typically 1K–2K.

• LED indicators for status monitoring and fault analysis.

Physical and environmental specs

• Form factor: desktop/compact 1U‑style housing (non‑rack‑mount).

• Power supply: Built‑in switching power supply, AC 100–240 V, 50–60 Hz, 1 A.

• Operating temperature: –20 °C to 55 °C.

• Storage temperature: –40 °C to 75 °C.

• Humidity: 10%–90% RH (non‑condensing).

• For more details, visit Prama official website

• CCTV Installation Services in Indore